Fixed all the dents

To fix the dent on the bottom of the rocker panel, I made a special puller attachment from some bits of scrap metal. It got clamped to the seam at the bottom of the rocker panel, and it was able to pull it down to the correct position. Then I used the stud welder to pull out the dented portion of the rocker panel.
I also welded a couple of small cracks in the hood, and filled in the holes in the driver’s door where the rear-view mirror had been attached.
The car is just about ready for pant removal, which is a messy job. I already have the new primer and filler, so there is nothing to wait for, except finding the time.