Very very close to the end

Strictly speaking, the paint job is done- I just have to finish putting the car back together. I found the stainless steel windshield trim, and got it all clean and shiny with my buffing wheel. I need to put some sealing compound around the rubber windshield seal, and as soon as it is dry, I can re-install the trim.
I also fixed an orange-peely area on the front part of the bonnet (i.e. hood). I wet-sanded the top surface of the hood with 2000-grit sandpaper, and then used a rotary buffer and polishing compound to get it shiny again.

Comments are closed.