Yay! Finished glassing the interior

The last portion to be glassed was the bow compartment, which is a hassle to reach.

Notice that for the forward compartments, I marked up the fiberglass cloth with a Sharpie to help me cut it out and position it. Nobody will ever see it after the boat is finished.

Filleting the joints

This is a time-consuming step. First, I pulled out all the wires. Then I started applying nice rounded fillets of epoxy paste to all the joints. I am about 2/3 done, and it will probably take about 30 batches of epoxy (one patch mostly fills a 12-ounce plastic cup).

I also added a few cleats to the floors and bulkheads that I hadn’t glued in place before assembly.